Power Meters / Powermeters (SRM, Powertap, Quarq, Ergomo, Vector, Stages, power2max, P2M, 4iii, InPower, Cinch)

@GoatandTricycle can be the Dzero guinea pig (:

Oh this lead me on a wild goose chase then, guessing the 32/48 isn’t 110
https://www.sigmasports.com/item/Praxis-Works/Buzz-Road-Chainrings-110BCD/2HVY

guessing the 32/48 isn’t 110

It's 110 with weird bolts to get around the problem

48/32 110BCD VIP NOTE: This is a custom ring set that can only be installed on our new Praxis Works branded 110BCD road cranks. This specific set includes custom ring bolts required for installation

The roller pitch circle of a 32T×½" pitch sprocket is 129.6mm. The rollers are 8mm and normal bolt heads are 12mm. Even if the chain side plate don't overlap the rollers, the largest bolt PCD which would work with that combination is 109.6mm. In practice, the chain side plates are about 9.7mm high and the spider tabs can't be made with an outer diameter of just the PCD + the bolt head diameter, because that would be too weak.

anyone got a single ring mtb powermeter that I might borrow for a few weeks? (end of may)

Anyone know if you can rent mtb powermeters?

Christ mtb bb standards are messy.

Yeah, I've seen PMs for rent. cyclepowermeters maybe

They don't seem to do MTB
https://www.cyclepowermeters.com/power-meter-rentals.html

Not mtb

Powertap MTB Disc wheel?

Nah 142x12. I need 148x12 as its boost.

And that will make nonsense. Mtb standards!

https://www.halocycles.uk/product/rent-infocrank/

Do they do a MTB infocrank?

Stages! :)

No.

Stages, ha!

You know you want to...

I guess renting MTB stuff = lots of broken stuff. Probably better off just buying one used and selling it off if you don't use it again.

I'm sure @danstuff will have 3 or 4 spare.

Actually, Hippy have you considered a MTB chainset PM to get around your low gearing issue?

Yeah, that's what I was looking into. Lots of options, none really worked for me. I think the best one was Easton Cinch or something. Most of the others didn't do 165mm or had some other limitation.

I would, but I can't find one 2nd hand.

And this bike has 1x12 but long term I'm going 2x11, and they're not compatible crank wise. So I can't buy one for this 1x12 setup

not been active recently

Buy new aka get your sponsors to cough one up. :)

moneygun.gif

anyone ordered a power2max recently? How long did it take to come?

Cheers for the credit card details hippy

My last P2M order was in 2016. Took them a few days processing and then probably a few days shipping.

My credit cards are topped out already. This shit is expensive.

I ordered one last year - was shipped a day after they received funds and took UPS ~3 days to deliver.

I've ended up with a load of DZero spiders - does anyone have any 170mm cranks that will fit 8-bolt powermeters knocking around? Ideally, 170 GXP.

Otherwise, I have 2 X DZero 110bcd spiders and a set of 170 Rotors I don't really need if truth be told.

Managed to dislodge a battery connector inside my Infocranks. Anyone in the UK that could repair? I've tried Jam but after saying they could went radio silent.

Jam have had email issues this week, it's been posted on their Instagram.