You are reading a single comment by @Scrabble and its replies. Click here to read the full conversation.
  • The OPI steerer fits Headshok 1.56" bearings.

    There is no 1.5" steerer :) There is only a 1.56" steerer that tapers down to 1.5" beyond the bearing surfaces and accepts 1.5" stems. It's called the SuperMax 2.0 steerer. It was used across the range when they realised the OPI steerer was jokes.

    Oliver seems to use the Lefty 50 hub, which is the plain old Lefty hub that all forks used back in the day, non?

    Yes - this is explained above, the hubs can be found.

    so it is the easiest version to find..

    If you want very old 26" MTB wheels or 650b Road (Oliver) wheels, yes, but if say you wanted to fit a modern 27.5" MTB wheel like Mavic XA, you simply couldn't.

    Of course - if you can get the hub you can build your own wheels. Might be a bit of a short lived and or pointless exercise for most because you are sinking money in to a dead standard and if the fork croaks the wheel is pretty much useless unless re-laced to a new hub.

  • Is the hub available too? @William. suggests his dad didnt like the front wheel faff - where is that wheel/hub at?

    I'm still keen by the way - throwing money into dead standards and hoping for the best is a hobby.

About

Avatar for Scrabble @Scrabble started