Sweet. Looks are not something that I care about. It's melting through the tube that I though was the problem, but I suppose with my ancient low-end frame the tubes are going to be fairly thick
You could very easily blow holes in bike tubing with TIG anyway
Right. Better practice on some shitty old frames.
@PhilDAS started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Sweet. Looks are not something that I care about. It's melting through the tube that I though was the problem, but I suppose with my ancient low-end frame the tubes are going to be fairly thick