You are reading a single comment by @edscoble and its replies. Click here to read the full conversation.
  • I currently have 1- 1/8" to 1.5" fork in a straight headtube using a Hope pick n mix external headset. I'd prefer to keep that and used a tapered fork but if there's something with a straight steerer that has good tyre clearance i believe i can swap the lower to 1-1/8th with the Hope.

  • Fair point, I even got that Hope 1 1/8 to 1.5 convertor cup in case I want to run a steel fork on the CX.

    I know that the M-Part carbon fork can clear 32mm, however I recall it does need a longer reach brakes.

  • Cheers, wish i'd kept my kinesis DC-07 as it's same spec as M-part. Would be a 10 mm increase in a-t-c over current fork which might not be that welcome though.

  • I know that the M-Part carbon fork can clear 32mm

    Link? I can just find one with standard drop brake and up to 28c tyres

About

Avatar for edscoble @edscoble started