You are reading a single comment by @jono84 and its replies. Click here to read the full conversation.
  • Talking of R/F forks anyone know of a caliper road fork that's

    365-370 a-t-c
    40-45mm rake
    Can be straight or tapered
    BUT... would like clearance for at least 32c

    I have a tapered Columbus Fel that's 365 a-t-c, 45mm rake and clears a 28c. But it's probably to nice for my needs and i'd rather have something with more tyre clearance if it exists (without slackening the front end too much).

    Or is 32c unrealistic with the fork length?

  • Can be straight or tapered

    As in adapter to run a straight fork in a tapered steerer? and what taper?

  • (without slackening the front end too much)

    Changing from a tapered fork in an EC44/40 lower to straight fork in a ZS44/30 lower gains you about 10mm axle to crown with no change in steering geometry

    Or is 32c unrealistic with the fork length?

    It's unrealistic with a 365mm fork, and it's also unrealistic with a caliper brake drop of <49mm. To fit a 700×32C with the minimum safe clearance needs over 350mm from axle to the underside of the crown. With a 375mm fork and a brake drop <57mm, it's possible.

About

Avatar for jono84 @jono84 started