Soldered joints are stiffer than the wires, so you'll have a stress riser and the wires will fail right next to your soldered joint.
Exactly, ideal repair is a new section of loom through the moving part so your solder connections are in the non moving part of the loom.
@Fixedwheelnut started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Soldered joints are stiffer than the wires, so you'll have a stress riser and the wires will fail right next to your soldered joint.