You are reading a single comment by @russmeyer and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
russmeyer
@TW plasterboard on brick
@Dammit Two doors, opening out - https://hisense.co.uk/refrigeration/all-refrigeration/rq560n4wc1/
@branwen Still slightly too narrow. The right side needs similar clearance for the door to open. So I need about 2.5cm clear on the right side of the fridge
The gap is 82cm
fridge is 80cm
But doors need ~3cm to open on either side. Left side is fine because the door is further out than the pillar, but the right side is a wall so I need the 3cm clearance on that side.
So I need the gap to be 83cm (let's say 84) really.
I think I might be alright. Just drilled into the plasterboard to see how far back the brick is and it looks like if that came off then it gives me about 2cm to play with.
So ~84cm wide for 83cm needed.
So could remove plasterboard and skim. (Then probably find that I'm about 3mm shy)