You are reading a single comment by @PhilDAS and its replies.
Click here to read the full conversation.
-
If the A-C is the same then it doesn’t really matter what it was designed for right? It’s the same size. Just depends if the tyre fits I suppose. And also rake/trail but that’s secondary in terms of fit
PhilDAS-
That’s what I’m thinking..
This is the stock fork, but I want disc, obviously, you see the crown size.. I obviously would rather not have a large gap / have to space the mudguard loads. I could obviously use a 650b to fill the gap more, but then probably narrower tyre.. would like 2” ideally.
Hmmmm!
Rhobbs
Can someone help satisfy my brain please?
Fork designed for 700x35-40mm tyre, a-c 395mm ...
With a 26” wheel with 2.00” tyre, sit around 15mm lower hub to ground and overall height from tyre to crown also 15mm ish?
If anyone has this set up for photos PLEASE let me know!
I can do it at work tomorrow but I don’t think I’ll get a 2” in my fork... maybe a 650b with slightly narrower tyre yes.. need to work out differences though
(To go on a frame designed for 395mm and 26x2” but don’t want to use the stock fork)