Isen workshop: adventures in batch production (or not...)

What does the slightly technical and muddy terrain in the middle of nowhere actually say, when it speaks to you both?

sssiiiiick faaaaasdeeezzz

Got a quick release on the integrated seat clamp on Kate's bike

When are you going to put decent brakes on it? ;)

Wait till you see mine ;l

Does anything every actually say anything? It's more the feel. The experience. Being but not seeing. Having seen without having been. The time for change. A change of time. Isen.

Just because it's possible doesn't make it right :p

Sachsidental meaninging ephiphany.

You understand the terrain, it echos the workbench, where the experience resides. The being comes from that and it can never. End

Help me out m8 - what did you use on the front fork to get the mudguard fitted with the PDW safety tab?

Some sort of angle bracket?

https://www.swinnertoncycles.co.uk/accessories-c1/mudguards-c74/spares-c78/sks-spares-direct-angled-fork-mount-p54520

Already tried them ones. :(

Tabs don’t fit in slot and mounting bolt is too skinny

1 Attachment

that PDW has a quick release clip - if you pull the end off what is left might be skinny enough to fit in there

Keeping the safety tab on is kinda what I want. I like my teeth

https://www.instagram.com/p/Bol1EPsBOev/?utm_source=ig_share_sheet&igshid=fj5ubgtbk92z

The bike in this pic has something pretty simple looking, what could it be?

could just be those https://www.swinnertoncycles.co.uk/accessories-c1/mudguards-c74/spares-c78/sks-spares-direct-angled-fork-mount-p54520 used the other way around - so the single side attached to the stay and the double side to the fork (even cut one of the double bits off)

It's the ones I posted above, with one side chopped off. I'll send a pic when I get in.

I got you.... just bodged this.

Inelegant, but seems ok for now.

1 Attachment

Slightly more expensive, but I used these for a more elegent solution.

https://www.planetx.co.uk/i/q/FSOOBBBMGM/on-one-bish-bash-bosh-rear-mudguard-mount-adapter-bolt

Made good progress on my girlfriend's Isen this weekend. Got all the internal cabling done and the drivetrain set up. Just need to get the steerer cut and finish the bar tape etc.

I also need some rubber grommets to tidy up the di2 entry ports, anyone got a link to which ones?

Also any suggestions for a bolt / blanking plug that will cover the hole on the downtube for the rear dynamo wire...?

Isen currently spreading fadez in the land of freedom

https://www.instagram.com/p/BvCosdagzT8/

Why such an ugly frame bag on a show bike :((((

You make it sound like there are attractive frame bags out there?

In my experience they all tend to be as attractive as the people that insist on using them.

In my experience they all tend to be as attractive as the people that insist on using them.

Savage

Oh, I was thinking of getting a framebag :'(

You make it sound like there are attractive frame bags out there?

enjoy wearing a backpack, bro