Anyone come across [relatively] low profile shelf brackets that will still take a heavy load (about 0.8m of stacked vinyl 12"s) or is that asking too much? I thinking something like the below, with a bit of triangulation, but still fairly low profile (can't find these in the UK) so the shelf hides most of it from sight under the front lip.
Do you really have no side walls to fix a frame to. .8m of vinyl is still a good weight. Otherwise the Vitsoe system works, I'm not sure if you can hand the large shelf on tiny rails though.
There are sides actually (alcove), I was just thinking I didn't want it boxed in. The tutorials I've seen sandwich a fairly thin frame with board, I'd worry about that coping with the weight, but could potentially reinforce with metal T-section.
Anyone come across [relatively] low profile shelf brackets that will still take a heavy load (about 0.8m of stacked vinyl 12"s) or is that asking too much? I thinking something like the below, with a bit of triangulation, but still fairly low profile (can't find these in the UK) so the shelf hides most of it from sight under the front lip.
Or