You are reading a single comment by @neilbah and its replies.
Click here to read the full conversation.
-
i had a composite wheel i stripped, they put the wrong kind of lacquer on, only months later did i notice the surface starting to leech when i took it out of a wheel bag to find it had started to stick to the fabric and in general had gone sticky again. Its for that reason that i only strip carbon frames with rather laborious hand sanding and no chemicals. :(
neilbah
From what I’ve read if you use really strong stripper it can (sometimes) get to the resin in the carbon.. in my case I was using a soft-core Diall stripper that I pulled off when the bottom layer (5 damn layers!!!!) of etch primer was showing