You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@M_V
Was hoping to be able to use these track ends,
But the chainstays on the shopper frame are 9mm ID and those ends have an 11.5mm OD plug so I don't think that's going to work.
Also, I cut through some of the weld holding the remnants of the chainstay brace plate on and started to peel it off, before I knew what had happened I'd pulled a bit of the chainstay off with the plate. So there's a +/- 3mm diameter hole in the bottom of one chainstay now :(