anyone into this bottom bracket standard stuff? tried to find reliable information online but all I got was headaches.
got myself a second hand quarq dzero advertised to be GXP, turns out to be BB30 with an axle length of 95mm plus 5 mm spacer (so actually BB30A or not?). my frame has got a BB386 evo standard with 86,5 mm BB width. is this going to work out with a PF30 bottom bracket or am I totally fucked? refund is an option but it was cheap so I wouldn't mind tinkering a bit.
Fit the loose crank to the axle. Is the gap between crank faces at the axle more than 86.5mm? If so, it will go in a 386EVO shell, you just need to sort out which spacers are required to fill the gaps. AFAIK, all SRAM road "BB30" cranks except Red Exogram are actually 386EVO
anyone into this bottom bracket standard stuff? tried to find reliable information online but all I got was headaches.
got myself a second hand quarq dzero advertised to be GXP, turns out to be BB30 with an axle length of 95mm plus 5 mm spacer (so actually BB30A or not?). my frame has got a BB386 evo standard with 86,5 mm BB width. is this going to work out with a PF30 bottom bracket or am I totally fucked? refund is an option but it was cheap so I wouldn't mind tinkering a bit.