Caad10 Black anodized 48cm + Sram Red + Hollowgram + Zipp csc wheels

Run out of space in my garage for more bikes with the hope I'll buy something tomorrow, so some of my favourite bits will have to go...

Full Sram Red 10 speed (minus crankset) - Shifters, brakes, RD, FD, ultegra cassette 11-28 or 11-25 (your choice) (could also do full duraace 7900 minus crankset if preferred)
Hollowgram SL 170mm chainset with cannondale 50-34 rings (might have spidering for extra)
Bars, seatpost, saddle, stem might vary, have a variety in the parts box in different lengths that could be put in.

Zipp team CSC training wheels (NOT pictured), good winter wheels, approx. 1500g with 32 CX rays each wheel. Used but plenty of life, some the paint is bobbling.
I've possibly got some other wheels that might suit, including chinese 50mm u shape clinchers, cx rays, novatec hubs, Flo 30 wheels,

Its currently built up like follows (down to 5.49kg) :

So I would need to rebuild, unless you prefer to have the frameset and parts seperately and build yourself.

Based in Southampton, possibly can post (haven't posted many large items in the past, so lack of confidence more than anything)

May also split if most of it goes: (as its part on the bike, off the bike anyway)

Frame set and Hollowgram - dibsed
Groupset - £275
CSC wheels (pictured below) - £120

Hey, I am inerested in the wheels, based in Mallorca.

Can you specify specs?

Hubs? Spokes? Rims? Bearings ok? Weight of them? materials?

Thanks a lot.

Hollowgram is keenly priced

Also interested in the wheels...but not in Mallorca.

Wheels are these:

https://www.zipp.com/wheels/team-issue/

Hubs are fine, wear indicators present. Some paint bobbling on rear wheel, front wheel is visually much better.

Not sure I would have designed a 32 spoke Training wheelset with 64 cx Ray spokes, but pretty bomb proof!
Bear in mind it is 10 speed freehub (unless you use 11-34 shimano cassette)

As you can see in pics, it’s been used as a turbo wheel most recently.

2 Attachments

Would prefer not to post to Mallorca tbh, don’t think they’re worth enough or small enough to bother.

Hi Acliff , what wheels are in picture to enable to drop its weight . Thanks

Not sure what you mean.
These wheels are around 1500g
I have a set of kink in xr200 with bitex hubs that are 1310g, and a set of Roval Alpiniste carbon tubulars that are 997g.

I think he's confused in that the wheels you are selling are not the wheels in the [original] picture. So he wanted the Rovals but you are actually selling alu Zipps

or something

Fair point, updated the first post.
The Rovals are definitely not training wheels with their cell flex record tubulars...

Thanks guy’s /gals
Yes I was appertaining to the Rovals then . I’ll pm you regarding the sale . Thanks

Is this still for sale? Will PM

Updated photo attached for anyone after the whole bike.
Now has Sram red full groupset including callipers and hollowgram SI with FSA super 50-34 chainrings.

I will change the bars and wheels (unless you want to buy some Ergonova team carbon bars in 38cm on top)

The pictured wheelset is not being sold, rather the Zipp CSC wheels above, or no wheelset.

I have also 50mm u shape Chinese clinchers with novatec SL hubs and cx rays in good condition for sale for £300 that could go on this. The rear hub needs greasing or new bearings, front hub and cassette body are fine, as is the brake surface.

Just realised, the white marks are where the bike was resting against my garden table and the white has transferred from the table, they are not scratches!

1 Attachment

If it comes to splitting might be interested in sram red groupset.

Yes, it’s available. PM me!

How much for this without wheels??

Hey, the frame is sold, the groupset and wheels are still available.