You are reading a single comment by @TotalShanner and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
PhilDAS
@TotalShanner
Ok I'm buying this from @suffolk_boii
I should be able to get an axle from @LeMesjeu
So my understanding is that when I get the non drive side arm off you would then tap the axle through with a rubber mallet which would come out attached to the drive side arm.
Thats of course when the axle isn't broken.
My hope is that once the NDS arm is off i can tap the broken axle enough for it to be hitting the drive side piece of the axle and getting the drive side arm off.
Once the drive side arm is out, how do i remove the piece of axle thats attached to the drive side arm?
Can @PhilDAS or @LeMesjeu shed any light on this as it seems you both have experience with this chainset?
Any suggestions and ideas from others welcome too! I know this might not be the best place to ask these questions but figure theres two folk here who might have some pointers.