You are reading a single comment by @veLLo and its replies. Click here to read the full conversation.
  • Bromptons recommended removal technique (when the bolts inevitably don’t come out with Allen key) Hacksaw should to be used as a last resort.

  • Ok but @maynardeames explained method suggests it's always the case. I'd hope that now and then you get the bolt out just by unscrewing...

  • The bolts are threadlocked in, if you get one out you then faff for ages trying to get the other out whilst the spindle rotates. 6mm, buzz buzz, done.

  • explained method suggests it's always the case.

    Usually is, if it come out easily, then it was installed incorrectly (bolt need medium strength Loctite applied).

About

Avatar for veLLo @veLLo started