-
• #2
I think you can just change the end caps to adjust the oln
But I could be wrong. Call “‘Ope” for clarification
-
• #3
Bollox
It looks like you can convert a pro evo to boost but their boost specific hub can’t go backwards.
-
• #4
i've been trying to figure that out - what i need is 135 oln QR...
I have QR end caps but these definitely don't reduce this hub to 135 oln.
Maybe the 142 mm hubs with QR end caps are reduced to 135 mm..? -
• #5
Sorry auto correct turned can’t into can. Above post now edited
-
• #6
yep - i actually ordered the 142mm hub on the basis that i could use it on 135 and 142 oln frames - wiggle sent the boost hub but i didn't realise until i'd built it up and scratched end caps etc :(
-
• #7
For reference received the following from hope:
Fitting standard QR end spacers to the 148 Boost rear hub will make it 141mm, there is no way to make that hub 135mm
-
• #8
Free bump. He's still got this hub.
FS: Hope Pro 2 Evo rear hub - 32h - (148 "boost" x 12)
New and unused - laced to rim then realised I done fkd up as this is for "boost" 148mm oln spacing.
Small cosmetic damage to swapout axle ends where grasped too enthusiastically with pliers.
what say you to £100 posted or collection wimbledon?