Mudguards

You are reading a single comment by @Lolo and its replies. Click here to read the full conversation.

•

Raphael in reply to @ltc

ltc
Is there a current go to set of guards for stupid bikes with very little clearance and no mudguard mounts?

I've not tried this guy's method (cable ties with rivets and washers) myself but it looks clever.

https://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=142434&sid=c2ed2008abd1b2c1c566be57e1e3e8ea&start=15

I have PDW guards, they seem to have really little clearance even with 23mm tyres. I haven't been able to adjust them well though as I'm missing the rear bracket and the front bracket hits the bottom bearing cup. I used their QR axle mounts for the stays.

•

Lolo in reply to @Raphael

The lack of mounts is easily bypassed, the lack of clearance less so! I could only fit a 23c on a bike with Enve forks and PDWs.

•

Raphael in reply to @Lolo

I think I will have the same problem if I try to go to 25mm tyres. It looks like the underneath of the front brake will stop the guard from being pushed up enough.

About

Avatar for Lolo @Lolo started