You are reading a single comment by @Rodolfo and its replies.
Click here to read the full conversation.
-
Plan is to use it with a threaded disc converter which can be had for a fiver/tenner from aliexpress on the threaded side for the rear disc that I will likely seldom use.
Are you sure you can get an adapter that'll allow you to run a standard rotor on a freewheel thread? I thought I had bought one (a while ago for a project that never happened) which came with a cheapo rotor that I was gonna swap out for a decent one but it turned out the bolt circle diameter on wasn't the usual one.
M_V
@Rodolfo
I bought a cheap 135mm disc-singlespeed threaded hub.
Plan is to use it with a threaded disc converter which can be had for a fiver/tenner from aliexpress on the threaded side for the rear disc that I will likely seldom use.
Best option would be disc/disc of course, but nobody (?) makes them, and if yes, not cheap.
Although cheap is robably not important for this one.