-
In theory (if your existing lighting circuits are installed correctly) putting another pendant in the circuit should be fine in terms of load.
But things will get complicated by the switches. How many switches control the existing, and how many do you want once there’s another pendant installed?
If it’s only got one switch and you want to keep it that way then in theory it’s all straightforward.
Apart from ceiling joists. If your proposed location means that you’re traversing ceiling joists then you have to drill them - and that is often more easily achieved by lifting the floor above...
Sorry no practical advice, but those are some of the things that might influence your decision to DIY.
-
@rodabod and @Dugtheslug
How many switches control the existing
1
and how many do you want once there’s another pendant installed?
1
Re the ceiling-this is the one with artex, so I'm happy to drill and patch bits up, as it may end up having to be plastered.
Out out interest what sort of rough price would I be looking at for plastering a room and hallway totalling 8m²?
Struggling to find an answer on the Internet.
There is one celling pendant light in our dining room, I would like to fit two pendant lights.
Tl;Dr is this a DIY job?
I've changed light fittings before. I'm assuming this time it will be a bit more complicated as I'll need to move the existing junction box(?) and add another, plus drill some extra holes,etc.
But is there anything extra in terms of what the electal system can take?
(Sorry for the inarticulate post, struggling to explain it)
Ps any good YouTube videos would help. Everything I'm finding is aweful US marketing shit.