You are reading a single comment by @Airhead and its replies. Click here to read the full conversation.
  • WRT my painting ply question- should I just buy the Zinser stuff?

  • You want to spray it? I don't have any simple advice for that process except, find someone who will spray it for you, in a proper spray shop. It's very nice when done properly. If you don't really need it sprayed then Zinnser stain seal followed by undercoat and top coats depending on what you want to protect it from. Indoors/Outdoors etc. You didn't give enough information to get a decent answer.

  • You want to spray it? I don't have any simple advice for that process except, find someone who will spray it for you, in a proper spray shop. It's very nice when done properly. If you don't really need it sprayed then Zinnser stain seal followed by undercoat and top coats depending on what you want to protect it from. Indoors/Outdoors etc. You didn't give enough information to get a decent answer.

    It's a marine ply panel that I'm using to provide a boot floor:

    I'm going to stick carpet to the top, but wanted to paint the whole panel black before I did so.

About

Avatar for Airhead @Airhead started