Wheelbuilding / Wheel Building / Wheel build help

You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.

•

russmeyer

Drum brake front hub - do I need to use the same nds lacing pattern as with disc hubs?

•

gbj_tester in reply to @russmeyer

do I need to use the same nds lacing pattern as with disc hubs?

You need to aim for as close to tangential as possible. As the flange is big, that might not mean as many crossings as a disc brake hub with smaller flanges, depending on the spoke count. 3X for 32h or 36H should be fine.

•

russmeyer in reply to @gbj_tester

Thanks, but I meant this stuff about heads in/out:

About

Avatar for gbj_tester @gbj_tester started