You are reading a single comment by @rogan and its replies. Click here to read the full conversation.
  • I did a bad...

    pictures here: https://imgur.com/a/lq0gqwF

    I unscrewed this thing in my shower tray to try and clean it out but now the bit under the tray is free moving so its impossible to screw it back on.

    The main issue i think is that the black seal is a really tight fit (obviously) so I cant get it past that point into the threads... the tray is tiled in so cant get access to it

    Am i stuffed?

    EDIT - i managed to do this: https://imgur.com/a/fjzAI97

    with the seal on the outside, will this be ok for a few days while i get a plumber in?

  • Without the seal in the right place it will leak for sure.

    The problem you k
    Now have is that even if you can reassemble it, without access underneath, you can’t check for leaks. If it’s possible to put an access hatch in from underneath you can reassemble, check and access again in future.

About

Avatar for rogan @rogan started