You are reading a single comment by @Dick and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Dick
Pair of Hope Pro 4 Disc Hubs
Planned for the AlOpen UpDown CX / Gravel / Adventure wheel build which isn't going to be happening any time soon due to some unexpected costs which need recouping.
These have been used before and show superficial signs of prior lacing and use, nothing detrimental to performance and no noteworthy marks other than from spoke lacing.
Rear bearings were a little gritty so i bought a new set of rear bearings (£40) didn't get round to fitting them so they'll be included.
Front bearings are very nice and smooth.
Sram XD Freehub which is brilliant for the cassette ranges available giving a 10T option on wide ration cassettes.
28 hole front and rear - perfect for cross and gravel being the 'just right' of not too much spoke count and not too little.
Includes adapters for all standards other than 12mm x 100 front thru axle which can be bought seperately (spent £30 on the QR ones).
6 bolt rotor interface which i still prefer as the rotors look a lot cleaner and SRAM Centeline rotors are very difficult to get hold of in centrelock without dropping £120, and i just don't think shimano rotors looks as good.
Basically what are in my eyes the perfect disc hubs in the perfect spec, which makes me pissed having to sell them.
I've had loads of DT240s hubs in the past, as well as Tune etc and i just think Hope look so much better, and don't forget the sound.......
£165
Collection N1
Postage at Cost