You are reading a single comment by @Emyr and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
freddo
@Emyr
Both Wickes and B&Q lack the barb fitting I need for the 10mm ID flexible pipe that fits my water pump. Also the tap came with a braided flexi pipe with a 1/2" BSP tap end and 3/8" supply end. Said big shops don't have anything with a 3/8" BSP thread, not even adapters, only 1/2" and 3/4".
The fridge's meant to be screwed from the inside. The blanking caps are a bastard to get off without using something sharp and pointy and behind the blankets they don't have a pre-cut hole for your "appropriate screws", not even a centering divot...
OH spent her Monday painting the kitchen unit: outside orange using a can of Dulux Endurance we bought last year but didn't get round to using, inside white using some expensive medium-VOC tough paint. Tuesday she dropped by Abakhan, our local fabric emporium, and got some rubbery dotty material.
The far side of the fridge cabinet sticks out slightly further because it will be one side of the ladder which will fill the gap to the kitchen unit.
1 Attachment