As above, looks like the pads are in contact with 2/3 or 3/4 of the braking surface of the rotor, not sure how you can get that down since you’re not using washers or spacers under it but that would help braking a bit.
@PhilDAS started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
As above, looks like the pads are in contact with 2/3 or 3/4 of the braking surface of the rotor, not sure how you can get that down since you’re not using washers or spacers under it but that would help braking a bit.