WTD. Aero bars and 27.2 seatpost for QR Kilo

Edit. Think I'm sorted.

Needing aerobars and seatpost for an unloved and tatty Quintana Roo Kilo that had been donated to my local bike Coop.

Pursuit style bar and clip on, or purpose built assembly from Specialized Shiv or similar.

~~27.2mm inline carbon seatpost. 300mm. ~~
(27.0 Kaloy was clamped in, but fortunately not damaged the ST)

1 Attachment

I have two sets of bars. First is an unbranded pursuit bar with clip on Profile Century aero bars (happy to split these if you just wanted the aero bars), plus Dia Compe bar end brake levers. Second is a full Syntace set-up with same bars as the above except the pursuit bars have kind of bull horn ends for normal brake levers. Levers are Shimano 105 and there's also unusual bar end Grip Shift 8 speed twist grip shifters on the aero bars, if you wanted them. Can upload some pics if you're interested in anything.

Hi, not carbon but I have a very nice Pro PLT inline 27.2 post - https://www.lfgss.com/conversations/322039/#comment14288625

You need an aero seatpost!

(I have a spare carbon one)

@walkmanman. I'll rule out the Century clip on, as I have barend shifters and levers.
pics of Syntace setup please.

@Vince any details of overall/aerofoil length and setback

Here it is.

£20

1 Attachment

@Vince looks good. Definitely interested if its 300mm

Too short unfortunately
250mm in total
190mm from Minimum insertion line to rails
125mm from Maximum insertion line to rails

1 Attachment

Thanks anyway @Vince
Allowing for 25mm post insertion below the top tube welds, I need at least 290mm

The maximum insertion line wouldn't even work on my Mrs bike, allowing me to rob her uncut Easton post 😣

Righto, here's the pics:

The second one shows where the paint is a bit tatty inbetween the two aero bars due to insertion of a special water bottle between them. Pads are almost new, only ridden two relay triathlons with them:)
My price is £20, which includes the brake levers but not the stem or shifters, which I don't think you want. The bar clamp size is 26mm.

Thanks @walkmanman. I could be getting a "used once" set of Token clip ons. I'll bear yours in mind if these don't work out... obvs if they go, no problem.

Ok, no problem