You are reading a single comment by @popdown and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
russmeyer
@popdown
My new sram mtb crank arrived today but I cant get it to sit centrally on the frame?
The distance between the crank arm and chainstay is ~17mm on the non-drive side and ~20mm on the drive side. I've added a 2.5mm spacer to each side of the BB shell (as per instructions - its a mtb crank/spindle on a 68mm BB shell). Everything spins freely when tightened up.
Any ideas? if I put 2x spacers on the non-drive side the gap difference is reversed (i.e. 20mm gap on the non-drive side, 17 on the drive side)
its like I need a 1.5mm spacer!