Wanted: 32h hubs and other random bits (36h rims, cheap dynamo wheels/hubs, fat tyre rim brake wheel)

After some weird bits:

• 32/32h 100/135mm 11-speed disc hubs. Need two sets actually.
  
• w i d e ultra-cheap 700c rim brake front wheel. Like for 2" tyres. Or just a rim.
  
• 36h 700c rim. <500g if possible but the're not going to be performance wheels so don't care that much. Brake track not needed but anything considered.
  
• Interested in any 26" dynamo wheels out there (that are cheaper/better value than the Decathlon offering). Or cheap dynamo hubs.
  
  

Done or no longer required:

• - Cheap long drop caliper brakes. Needs 70mm drop on the rear at least. Something like Tektro R559.
  
• Single-speed coaster hub/wheel. 700c or 650b.
  
• cheap/lightly-used 42t narrow-wide chainring, 110mm BCD, 5-bolt. Black or silver. Hoping to get something cheaper or at least quicker than one from China.
  
• cheap (not X0 basically, unless you're feeling kind) SRAM Exact Actuation 10-speed clutch mech. Long cage preferred. GX Type 2.1 would be perfect. Can't be one of the 1× ones as I need it to work with a double.
  
• GXP triple crankset for road, ideally something like the Truvativ Elita. 172.5 or 175mm crank arms.
  
• 46t 130BCD chainring. For a double chainset so needs shifting pins or whatever.
  
• Flared bars, black. 31.8mm clamp. Something like Alpkit Bomber
  
• 26" × 2" mudguards. Don't care what they look like.
  
  

Everything needs posting up to Edinburgh.

Thanks!

Updated, give me a shout if you can help with anything!

Hi, I have a Truvativ Elita 172.5 with a wide selection of rings. I also have a Shimano triple and bottom brackets for both. PM me for contact details.

I may be sorted now... but are the Truvativ cranks for a triple? What BCD?

Yes both are triples. The chainrings are standard Shimano road size for the outer and middle and the inner is a smaller BCD. I'll check in about 30 minutes and let you know exactly. As I said I've large choice of rings to pick from. All good condition.

130mm BCD for the outer and middle, looks like 74mm for the inner but I couldn't measure it properly without disassembling it.

That'd do the job. Do you have a picture? And the Truvativ cranks are for GXP, yes? I need it to match the BB that's already in the bike as I'll be swapping cranks from time to time.

Regarding rings I'm after a 46/48t outer (and a 30/32t inner) but I appreciate those might be hard to come by. Some of those Truvativs came with a 30t inner so if you've got one of them that'd be great.

I'll get it in the morning and check what rings I've got. Sure I can dig out that kind of ratios if you don't mind different rings. I'll pm you in the morning (10.00ish)

Lovely. I'll be off-grid in the Highlands Saturday afternoon-ish - Sunday so if you don't get a response that'll be why!

Edit: wait, just realised it's Thursday not Friday, so I'll be on the internet tomorrow. Am trying to coordinate the sale of some other parts, a camping trip and a gig at the same time and getting mixed up!

Sorry - yes its GPX and I've got the spacing rings for the BB if you need them.

OK

Hi Frankenbike, Sent PM

Updated again! Coaster hub and mudguards also wanted.

Updated once again. So far this thread has only netted me some cranks but I guess I like weird parts!

(thanks to @wingnuts for the cranks, should have them soon)

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F332365382766

Those rims are good for the money and the seller has loads of options in 36h

I bought bulk from him before so would recommend

Ooh, nice, thanks! I swear I looked through all the cheap eBay rims (they're mostly 700g each) but I must have missed these. 13mm width is a bit annoying as I would have really liked to go all the way up to 35mm... can't beat the price though. Think I'll hold off for a little bit longer and see if I can get something wider, otherwise I'll probably go for those

Any interest in a 700c Mavic wheel wheel built up with a hub brake? I realise you wanted the hub sperately but if you were going to build up a nice 700c wheel using it...

Is it front or rear? I've got a coaster hub that I want to build up for a rear wheel but may be after something for the front

It's a front.

Okay. I've been talking to someone else about a hub, will give them another prod and get back to you

Righto