• My setup: each shifter plugs into that box. Another cable goes to another box near bottom bracket with four sockets. From there separate cables go to front derailleur, rear derailleur and battery.
    You need access to the front junction box for charging, putting it in the stem may not be practical.
    You should read this whole thread before buying anything!
    There is good information and diagrams on Shimano's website.

  • Thanks, that’s super useful - definitely got some reading to do! I’ve snagged a Tririg stem so access to the front junction box in the stem should be ok for charging. Need to figure out the bottom bracket/battery set-up.

About