Hoke's Brompton (Good things comes in small packages)

Was actually thinking more the swissstop ones.

I thought you were going for weight saving...just add some tubeless sealant

Too harsh, soft as possible.

Ti folding/removable pedals here - https://www.sjscycles.co.uk/ti-parts-workshop/

Also look at the Jtek Ti seatpost

Becuase it will ruin the rims more quickly?

I had this discussion in the Brompton thread, so you just add sealant in the inner tube?

1. hard pads give less feel, 2. goodbye rims.
   

Yes.

Remove the valve core, squirt in the sealant, refit the core, inflate, ride.

How long does the sealant last/when will I need to top up? Also when I need to top up is there a limit on how many time I need to top up before I need to replace the inner tube?

Thanks, will add these to the shopping list.

Ti or carbon seatpost?

https://www.sjscycles.co.uk/tyres-tubestubeless-tyre-spares/finish-line-multiseal-sealant-4-oz-bottle/

use half a bottle, should not dry up so no need to top up.

Jtek ti is light, looks rad, and still has the lip so it functions properly. Carbon is a dirty material to use on a Brompton ;)

yeah, make sure you buy inner tubes with removable valve cores for this, and then use leatherman pliers or a special valve core remover tool to add the sealant.

Wow! Seriously? Many thanks!!

Yeah, but I can resist the grams saving! Plus it’s nice to get matchy matchy handlebars and seatpost is somehow very satisfying. The only thing is worry is that it might crack/fail during everyday usage.

This makes a lot more sense as I didn’t see any removable valves on the standard Brompton inner tube...

I've tried the sealant in inner tube thing. With Stans and with not a lot of success. Maybe sealants have moved on a bit since.

has worked well for me in a tube under 26" worn down city jets, with a small bottle-full of stans. but of course now I say this it will stop working

stans has been working fine for me an my gf for 1000+ miles each, and loads of customer bikes have reported good things

brompton valves are removable.

Quite like the ti parts rainbow one, just not ready to fork out £240 on it just yet.

is very very nice, but not as light as the JTEK and doesnt loose the pentaclip - which is not a good/bad thing ..

Is this folding DBAD?

Did I see this in Condor about a week ago?