You are reading a single comment by @r_mash and its replies.
Click here to read the full conversation.
r_mash-
Summat like this.
https://www.ebay.co.uk/itm/M10-3-Drill-Adapter-with-Polisher-Pad-Plate-for-Car-Furniture-Polishing-/182393647495Spend a bit of time perusing eBay and see if you can find a kit.
general_greyharbour
Polishing is a DIY-able project if you fancied it.
Assuming there is actually enough clearcoat on there.
something like this would do it...
2000 grit paper wet
3000 grit paper/pad wet
coarse cutting compound and coarse pad
fine compound and finer pad
polish and a mop
By hand will take you until 2021 but you can get a small adapter for a drill and a DIY kit from car enthusiast sites.