For Sale: Slam that stem - low stack headset cover

File it?

It's too small rather than too big unfortunately. Cheers though

Thank you that's kind of you. I'll see what I can do

Anyone want to buy a 45x2 headset cover..?

Hello Tester, are these still available?

are these still available?

Yes, all standard sizes are in stock.

Hello. These only work for semi integrated headsets, right? Nothing doing to reduce the stack on an orbit Mx?

These only work for semi integrated headsets, right? Nothing doing to reduce the stack on an orbit Mx?

They are designed for fully integrated (IS41/IS42). You might be able to take a couple of mm off an EC34 headset which uses similar ACB cartridges, measure it up treating the rim of the upper cup as though it was the top of the head tube. I've made one for myself to take 3mm out of the stack of an EC34 Cane Creek 10 or 40

Thanks for all of your help @mdcc_tester, sorry for making a meal of it. All worked out in the end, I’m really pleased with the result

1 Attachment

@mdcc_tester
Any stock of headset caps for a CAAD12 Disc and SuperSix Evo? (I'd guess they're the same?)
Could I order one for each if so.

Hey @mdcc_tester - Do you know which cap you'd need for a Tarmac SL6 frameset at all? And do you have stock, please? :D

Do you know which cap you'd need for a Tarmac SL6 frameset at all?

No, you need to take your own measurements

do you have stock, please?

Everything except 45×3 is in stock

How necessary are the sealings of my current headset cover? It shows 2 rubber seals which also prevent me from removing the cover without lifting the fork.
Also would it be possible to get a slightly different design? I think it would be a bit more aesthetically pleasing if the radius was lower or chamfered (assuming @dbadger's cover is 46x4, because that's what I should need :))

1 Attachment

How necessary are the sealings of my current headset cover?

Not critical. I've had one of my covers on the T3 for 7 years, and it's still on original bearings. Of course your service conditions may be harsher and the seals don't do any harm.

Also would it be possible to get a slightly different design?

Of course. You can have any profile you like, provided that you pay the prototype price. Prototypes start at £100 and go up from there pretty quickly as you start adding requirements

Is wind tunnel testing included? Jk, I believe you put some thought into it.

Not critical.

Great! Is a 46x4 in stock or do I have to wait for the next batch?

Is a 46x4 in stock

Yes

Fitting accuracy on steerer is awesome

1 Attachment

<3 - and nice shopping of topcap

Are you still open to shipping across the pond to the US? (no hurry). I have been running an 8mm top cap and would love to try your 3mm. 48mm is ideal (that's what I have now with the taller one) as my head tube is actually 49.5 mm....the 48 looks close enough.

(SlamThatStem here in the states is closer to my location but theirs is 47mm diameter)

SlamThatStem here in the states is closer to my location but theirs is 47mm diameter

And more expensive, despite the proximity 😊

45x3 in stock again yet?
With some black stem spacers?

45x3 in stock again yet?

Not yet, probably looking at the end of January as I haven't even ordered materials yet

Any 45x4 in stock? Still after a 45x3 as well.

Any 45x4 in stock? Still after a 45x3 as well

45×4 is in stock, 45×3 is taking a bit longer than planned but they are on the way. Turner was snowed in on Friday, apparently.

45x3 in stock again yet?

Yes

Another Cinelli owner, looks like the ones up the page match what I measured, so
Any 46x4 in stock? If yes, pm your paypal. Thanks