You are reading a single comment by @hippy and its replies.
Click here to read the full conversation.
-
Aha, different thread (pun intended). Thanks!
"Using higher strength thread lock isn't going to help if you're not degreasing the threads properly in the first place. As the threads are anodised aluminium, you should probably be using primer 7471 before applying Loctite. If all else fails, you could always ask Rotor to redesign their crank/spider interface to something which doesn't look like the primary design goal was to have the spider push off the crank whenever pedalling torque is applied."
hippy
https://www.lfgss.com/comments/13922198/incontext/