Quarq Elsa power meter - Columbus Tusk fork - Wheels MFG PF30

I've got a few bits to sell.
They're all located in W4 or W8 or can be posted at cost.

Wheels manufacturing PF30 bottom bracket

This is the one with 'angular contact bearings'.
I actually havent used this, but it has seen light use from the guy I got it off.
Light marks on inside of cups from removal (as seen in pic).

£20

I think I've priced things fairly, but if not then let me know!

Pics here - https://flic.kr/s/aHsmcGpdH3

Power meter now £300.

That's a bargain for a very very good powermeter.

Interested in power meter - however is it BB30? All my frames are BSA, have a horrible feeling it won't fit...

Sorry, it's BB30 so wouldn't fit

Don't suppose 50/34 is possible on 130BCD?

No, annoyingly not. 38 is the smallest I think

Axle might be long enough for external 30 cups when the preload collar is removed...get the tape measure out OP.

Edit: doesn’t look like there is a preload collar, so have a free bump instead:)

Im running Force BB30 cranks on a Brother Kepler with a Raceface Cinch 30mm bottom bracket. A bit of an experiment, but so far few hundred miles with no issues. Spins smooth with no play. Just get some very thin axle spacers to set the preload right.
As a reference - the spindle measures around 95mm on the bike now, measured from spider to nds crank, so not including the splines.

105mm to the end of the axle. 90mm to the splines of the axle.

1 Attachment

Although I just ran it with a 29 on the back which works out about the same as 34-26

Last price drop before eBay!
Power meter now including chainrings.