You are reading a single comment by @_Zed_ and its replies.
Click here to read the full conversation.
-
I used small amount of Sugru to stick the junction, excluding the clip bit for a lower profile, to the underside of my stem. Did it a fortnight ago and seems rock solid.
Previously had the junction mounted to the underside of the puck end of a standard Garmin mount -unscrewed the puck then ran two very small zip ties through two holes, secured those to the junction, then screwed the puck back on
iamalex
@_Zed_
Does anyone have any suggestions how to mount my Di2 junction box / ideally underneath a wahoo mount. I haven’t googled properly, but I want something like the Tune Porteur, but I have a dead stem. And no I cannot use the superzero clip :(
Any suggestions. Don’t want to use the rubber band 🤦🏻♂️