• Here are the dents.
    Also, it's drilled for a rear brake but the thread is vertical.
    Is there some kind of adapter for fitting a rear brake to the frame?

    Thanks!


    3 Attachments

    • IMG_3197.JPG
    • IMG_3199.JPG
    • IMG_3200.JPG
  • Is that a crease in the top tube dent, or just the light/angle? Either way, they wouldn't concern me.

    That's not a brake mount, it's a mudguard mount. Slightly curious that this has been built as a road bike (bottle cage mounts, mudguard mounts and a pump pip), but no rear brake.

    Not knowing what the tubing is or who made it, limits what you could get a little. What diameter is the seat post? Are the fork and track ends branded? These will give you a clue as to the quality.

    As it is, I'd say somewhere between £100 and £200: 27.2mm seatpost and Campagnolo ends (for example) would push it towards the upper limit; 26.4mm post and unbranded ends towards the lower.

About

Avatar for Jed_Maxwell @Jed_Maxwell started