You are reading a single comment by @Tijmen and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
andyp
Tijs
@Tijmen
Replace Rival rear derailleur with a long cage X0 derailleur. Both for a clutch mech and to allow for a bigger cassette, because:Done.Dial in second wheelset. 650b with tubeless 2.0" RaceKing tyres and an 11-36 cassette.Done.While doing this I'll also replace the rear rotor with a 160mm rotor, because I couldn't stand non-matching rotors.On the 650b wheelset the rotors seem to be slightly more outboard, I plan to re-adjust the calipers for this rotor position and use washers to shim out the rotors on the 700c wheelset to match. Should work, right?And adjust the reach / lever position while I'm doing this.Half done.Get rid of the front derailleur and install a 42t narrow wide ring. Gear ranges seem to be quite okay for both wheelsets.Done.1 Attachment