You are reading a single comment by @macaroon and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
macaroon
Just had a look and seem to have (hopefully) fixed the problem.
It looks like the worn pads meant that the actuation arm was cycling too far through its travel. After I wound the pads in manually with the 3mm adjusters on the side and released cable tension from the actuation arm it now seems to be working normally again.
I still don't know if I entirely trust it, but at least it's working