• Thanks for the reply, watch runs although a full wind only runs for 20 or so hours (should be 40 for this movement new if google is to be believed).
    The crown doesn’t stay out when setting the time which is annoying but fine, just the chrono doesn’t operate.
    The buttons do actuate the levers but there’s no positive engagement that I can feel (no click). I took a couple of videos I can share if that’s any use?

  • Running time most likely due being dirty / dried out oil, as it will have a modern mainspring which don’t tend to “set”.

    Crown not snapping positively between winding and setting positions is usually due to a snapped “set lever spring”. Quite common, cheap part.

    Post a video if it’s easy enough!

About

Avatar for rodabod @rodabod started