You are reading a single comment by @deleted and its replies.
Click here to read the full conversation.
-
I would recommend trying to make sure the bracket fits as neatly to the fork crown as possible to ensure you don't have clearance issues.
Apparently can take a 2.1 inch 29er tyre up front (76mm wide between the legs). Can get a good few fingers in there with the guard on. Reckon it'll be OK. Thanks once again.
1 Attachment
-
deleted
hippy
No worries - glad you're getting some use out of it. I would recommend trying to make sure the bracket fits as neatly to the fork crown as possible to ensure you don't have clearance issues. I've got a fork with huge clearance but I can see how might be an issue for others.
@youramericanlover i'd reiterate my advice about applying the di2 guides. Thoroughly clean and dry your frame first then use a hairdryer on the frame to heat it up when you apply the sticky part.