-
No worries - glad you're getting some use out of it. I would recommend trying to make sure the bracket fits as neatly to the fork crown as possible to ensure you don't have clearance issues. I've got a fork with huge clearance but I can see how might be an issue for others.
@youramericanlover i'd reiterate my advice about applying the di2 guides. Thoroughly clean and dry your frame first then use a hairdryer on the frame to heat it up when you apply the sticky part.
gillies-
I would recommend trying to make sure the bracket fits as neatly to the fork crown as possible to ensure you don't have clearance issues.
Apparently can take a 2.1 inch 29er tyre up front (76mm wide between the legs). Can get a good few fingers in there with the guard on. Reckon it'll be OK. Thanks once again.
deleted
Thanks very much for putting me onto this, Paul from Fairburn Fabrications is making me one of these so I can mount my supernova to the mudguard point on the back of the fork crown. Such a niche market. World needs more talented people that make shit.
Machined out of a solid block of aluminium apparently. I love this forum.