You are reading a single comment by @apc and its replies.
Click here to read the full conversation.
-
It is currently set up so it can shift into the smallest cog
In the stand, as you are coming down the gears (to the smallest) they all click through, until you get to the smallest where it takes two clicks to get in. Feels quite smooth until that point.
When you are riding though it just feels pretty rough and doesnt change gear, seemingly at any point in the block, will check on my ride home if its towards any particular end of the block.
apc-
Your shifters and cassette are mismatched. There shouldn’t be 2 clicks left.
-
I had the exact same problem a week or two back, problem was I needed a new chain as mine hadn't been changed since I first bought the bike. Not entirely sure this info helps as I don't know the back story but worth a try
M_V
On1
When you adjust it so you can get the smallest cog is the shifting better over the 3 or 4 cogs at that end of the block than the 3 or 4 at the other end?
Vice versa, if you adjust it to get the biggest is the shifting better at that end?
If so, the hanger is bent.