You are reading a single comment by @BTR88 and its replies.
Click here to read the full conversation.
-
Buy a crown mounted one like @thebrenthamtaffy and @M_V suggest. You’re less likely to get brake judder the lower down the front your mount the cable hanger (although you might still get it, in which case you need to toe in your brake pads as next step).
Get rid of that end noodle and route the brake cable+outer from the bars to the hanger and feed outer into the hanger just like you would with normal calliper brakes, no need to go above the stem
BTR88
thebrenthamtaffy
I haven't taped the bars and I don't mind making new outer cables etc.
Still not sure which to purchase, as it won't solve the problem with the cable going in that direction?
Also, it's a 1" set up with a quill adapter, will the black cable hanger adjuster work?