You are reading a single comment by @Turkish and its replies. Click here to read the full conversation.
  • Some progress. Here's an initial drawing from the builder.

    I suspect I need to increase the minimum chainstay length to 425mm. I want to accommodate 700*40 with guards, and 27.5*2.25 without. My calculations suggest this should work...

  • I suspect I need to increase the minimum chainstay length to 425mm

    Whats the maximum chainstay length? My sliders make the CS 415-435 and 435 is absolutely plenty space. You might run into trouble trying to get 2.25s in the rear though. Thats the kind of size that needs a wider bb so theres space for the CS inbetween the tyre and crank spider, even with 650b

  • Which bike is that on?

    I'm basing my geometry on the cross check, which has a stated chainstay length of 425. Perhaps that is measured to the midpoint. I shall check.

    I'm nervous about 2.25 in the rear. Might settle for 2.1 or 2.0. But if I do that I might also check the BB drop.

About

Avatar for Turkish @Turkish started