-
• #39852
with filters on and an airbox, probably not much noisier, also helps it's all a distance behind you
mine is only loud because the airbox is about 300mm behind the steering wheel effectively
-
• #39853
Hmm, just reading a thread where the driver won't get in the car without earplugs and a helmet, which would be annoying.
-
• #39854
In my experience of ITBs, pretty noisy if you're giving it the beans, not so noisy if you're just cruising. If you're concerned about it, just stick some extra soundproofing on the rear bulkhead inside the cabin.
-
• #39855
RS6 service update. Bad news - the oil leak is the dreaded dry sump pump seal. Usually an engine out job to fix. Good news - it's not too bad and doesn't need doing yet. Bad news - one of the rear DRC suspension hydraulic lines needs replacing, so that's another 500 quid please sir thank you kindly. Should be ready on Monday.
-
• #39856
Oh my...
-
• #39857
In my experience of ITBs, pretty noisy if you're giving it the beans, not so noisy if you're just cruising. If you're concerned about it, just stick some extra soundproofing on the rear bulkhead inside the cabin
I don't have a roof in the conventional sense, so share the same environment as the engine in some ways, hence my question.
-
• #39858
Wait, are you spending all this money on cabriolet?!?
-
• #39859
sorry
-
• #39860
They’re really fucking noisy on my car.
-
• #39861
Could it be temporarily fixed with some oil additive? It fixed the oil leak on my w124 completely
-
• #39862
Not sure I want to risk it. The cost of replacing the seal is a lot, but the cost of replacing the engine is truly Biblical.
-
• #39863
Got the 9-3 tracking done today, didn't know they could adjust the rears as well....was wandering a little bit, so I'll find out over the weekend if it's made a difference. Took them 40 minutes though
lines starting with a 'greater than' denote quoted text
-
• #39864
With new wheels!
1 Attachment
-
• #39865
There must be some mistake, can't seem to see a roof?
-
• #39866
Gonna need a drip tray.
-
• #39867
Sweet!
What bumpers are you going with? And sorry if I missed it but what's the engine?
-
• #39868
Recently acquired one of these- future project...
1 Attachment
-
• #39869
Bumpers? It’s a racing car...
Engine is limited by the series. +40”, forged pistons, free cam and head. 3/4” SUs and that pretty much it.
-
• #39870
Need to fit the screen and the cage before the hard top goes on.
[edit -wait a minute, are you sulking? :) I’ll take my whoosh over here...]
-
• #39871
I think they were called a brumby in Aus. Awesom
-
• #39872
There is some stuff that frosts sell that you rub on the outside so seals the weep. Or clean the area well and a use fernox LSX.
-
• #39873
Can you super polish the bottom end?
-
• #39874
They can really rust...
Initially, in the UK, the Subaru was sold by agricultural equipment suppliers.
Ha! Sideways will happen. Not sure about a victory. Maybe a class win, on a snowy day at croft or somewhere like that when no-one else turns up...
The target (by rapidly diminishing probability):