You are reading a single comment by @PhilDAS and its replies.
Click here to read the full conversation.
-
I’ve got 2.5mm DS and enough 0.5mm spacers. Just need the NDS spacer which as you say, the diagram just says 68mm. As in you need this one for 68mm BB shell or this one for 73mm shell. But no actual dimensions of the spacer. I think the bb30a one is 2.5mm NDS and since it’s a 5mm wider shell, I’m guessing it’s 7.5mm for bb30
PhilDAS
swedeee
mcmyk
according to cannondale its a 2.5mm drive side spacer and a 68mm spacer for non drive
on the non drive you also need the wavy washer and 1 (or more) 0.5mm spacers