You are reading a single comment by @Tijs and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Tijs
Make sure the back nut, stationary arm and centre bolt (red arrows) are locked together, which they should be as a result of the back nut acting as a jam nut against the thread in the stationary arm, and that the set screw (blue arrow) is properly set against the M7 thread on the centre bolt. If your cable is still pushing the brake off centre, it's usually due to a too short cable housing, which is particularly common at the rear.