Any question answered...

You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.

•

Sumo

This product:
https://www.lordgunbicycles.co.uk/fsa-bb386evo-sram-gxp-bottom-bracket-reducer-road

FSA BB386EVO Sram GXP bottom bracket reducer

Adapts Sram GXP road crankset into BB386EVO shells with a PF30 bottom
bracket already installed.

I don't understand why it mentions a PF30 BB. I've got a frame that takes bb386 and some GXP cranks. Will this work to make them fit?

•

gbj_tester in reply to @Sumo
I don't understand why it mentions a PF30 BB

Because it's just a set of top hat bushes to fit the 24/22mm GXP axle into 30mm ID bearings. It will work if you have 30mm ID bearings installed in an 86mm wide shell.

1 Attachment

•

Sumo in reply to @gbj_tester

so it's a bb386 -> pf30 -> gxp convertor?
•

Sumo in reply to @gbj_tester

It will work if you have 30mm ID bearings installed in an 86mm wide shell.

What do you mean by this? I have a GXP crankset and bb386 frame with no bb.

About

Avatar for gbj_tester @gbj_tester started