-
Can't really figure out how that works. I look at this page on drivetrain compatibility an awful lot and it seems to suggest Campy/SRAM aren't compatible. Also (in general) only the 10-speed SRAM stuff is compatible between MTB and road (though you can bodge together 11-speed road shifters and a 10-speed MTB derailleur). But if you've got it working that's cool.
I had the same problem with the inline shifters (though I've got SRAM road levers not Campy); took about a month for them to arrive in the post as my gears and shifting slowly got worse and worse.
It works fine now though, and clutch mechs are a revelation. Although I think I may need to replace the outers as the shifting going a bit off again.
-
95% still sounds way better than the shot-out 5500 that's on my quantum pro atm :D there's a set of Chorus ergos on the local bay that ends tomorrow, might grab them if they're reasonably cheap anyways.
You are reading a single comment by @Harry and its replies.
Click here to read the full conversation.
frankenbike
slothy
@Harry 
@slothy I read somewhere that Campag shifters work with SRAM road rear mechs, and read separately that SRAM road shifters have the same pull ratio as SRAM (X-series) mtb mechs. Ergo (pun intended), Campag shifters should work with SRAM mtb mechs.
As I say, my current shifting is 95% perfect but I still need to add a barrel adjuster. It's due to arrive this week so should be able to report back this weekend.